Set Extraction Settings for Project:

 

To set Extraction Settings for you InspectionXpert OnDemand 2.0 project go to Options>Project Options>Extraction Settings

•NOTE: General Characteristic Extraction Settings are applicable to both OCR and SmartExtract tools.

•NOTE: SmartExtract Settings are only applicable to the SmartExtract tool.

Characteristic Info:

•Select Create For Each Instance if you want to create a separate instance for characteristics with a quantity of more than one (1). 

•Default Classification: Use the Default Classification dropdown menu to change the default classification for the extraction.

Dimensions:

•Select Include to allow the extraction of Dimensions from the 3-D Model or 2-D Drawing

•Select Basic to extract basic dimensions

•Select Reference to extract reference dimensions

•Select Inspection Only to disable the extraction of Basic and Reference dimensions.

Notes

•Select Include to allow the Extraction of Notes, Datums, and Flag Notes from the 3-D Model or 2-D Drawing.

•Select Correlate Flag Notes to allow the correlation of flag notes.

•Select Section View Markers to include section view markers in the extraction

GDTs

•Select Include to allow the Extraction of GDT Frames from your 3-D Model or 2-D Drawing.

Welds

•Select Include to allow the Welds from your 3-D Model or 2-D Drawing.

 

 

Note: These settings can be saved in a Project Template